Roberts Firm Set Transitional Pressure Sensitive Adhesive, Off White, 1 Gallon
For installation of Luxury vinyl tile (LVT), luxury vinyl planks (LVP), vinyl composition tile (VCT), vinyl sheet goods, carpet tile (vinyl backed), carpet cushion to substrate, and stair tread (rubber & vinyl).
Acrylic PSA Moisture Control Firm Set Transitional Pressure-Sensitive Adhesive
Concrete, primed Gypsum, cement backerboard and fiber cement underlayment. APA-grade plywood and OSB. Properly prepared existing flooring (excludes self-stick): VCT (single layer) sheet vinyl (single layer non-cushioned, fully adhered). Properly prepared ceramic tile. Terrazzo and radiant-heated floors not exceeding 85°F (30° C)
For interior installation only; ideal for heavy traffic, with great performance under rolling loads
Used as a pressure-sensitive adhesive, it has a 60 minute open time and a 12-hour working time; For semi-wet installation, it has a 20 minute open time and a 40 minute working time
Installs like a pressure-sensitive adhesive, and firms as it cures to form a permanent bond
Low odor and VOC (<1g/L)
Powered by Microban®, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation.
Covers up to 350 ft2 per gallon depending on trowel type or roller, substrate and installation conditions.
