Acorn Engineering Company 18" Lav-Toilet Comby On-Floor Center D-Shaped Lavatory
Fixture is fabricated from 14 gage, type 304 stainless steel cabinet and toilet bowl and is seamless welded construction with a satin finish
The inside of the toilet bowl also has a satin finish
Cabinet interior is sound deadened with fire-resistant material
There are no accessible voids or crevices where contraband can be concealed
Lavatory oval bowl is 14-3/4" x 9-1/2" x 5" deep with a 1-1/2" o.d. plain end standard elbow waste outlet
Valve is an air-control pneumatically operated, pushbutton valve using atmospheric air
Pushbutton is vandal-resistant and requires less than 5 pounds to activate valve
Valve is direct acting, metering with non-hold open feature with timing adjustable from 5 to 60 seconds
Valve includes a 0.5 gpm flow control and can be remotely located up to 10 feet from the operating pushbutton
Valve and bubbler conform with lead free requirements of NSF61, section 9 and CHSC 116875
Toilet is blowout jet type with elongated bowl manufactured to ASME A112.19.3 and CSA B45.4 requirements and will flush with a minimum of 25 psi flow pressure when used in conjunction with a minimum of 1.28 gpf
Trap has a minimum 3-1/2" seal and will pass a 2-1/8" ball.
MFG# 1440-CT-2-BPH-04-M-PH
California residents: Prop 65 Warnings
Warning
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov
