Sliding Door Roller, 1-1/8 Inch Steel Ball Bearing, Package Of 2
Used To Replace Rollers That Are 1-1/8 In. Diameter
1-1/8 In. Concave Roller
Can Be Mounted Using A Rivet, A Roll Pin, Drive Pin, Binder Post And Screw Or Bolt And Nut To Install The Roller In Place
Steel Ball Bearing Wheel
Contains 2 Steel Ball Bearing Wheels, 2 Axle Pins, 2 Roll Pins, 2 Carriage Bolts With Nuts, 2 Rivet Axels And 2 Binder Posts With #8-32 X 1/2 In. Screws
Easy To Install In Less Than 30 Minutes With A Few Simple Tools
A Phillips Head Screwdriver Is Required For Installation
For Further Dimensional Information, Please See The Line Drawing
