Input 115VAC 60Hz rated @ 3.5 amp. Power supply input options: a) One (1) common power input for ACM8CB and lock power (factory installed). b) Two (2) solated power inputs
One (1) to power the ACM8CB and one (1) for lock accessory power, (external power supply is required). (Current is determined by the ower supply connected, not to exceed a maximum of 10 amp total). Eight (8) Access Control System trigger inputs. Input options: a) Eight (8) normally open (NO) inputs. b) Eight (8) open collector inputs. c) Any combination of the above.
Output: 12VDC or 24VDC @ 6 amp supply current. Class 2 Rated power limited outputs. Eight (8) independently controlled outputs .Output options: a) Eight (8) Fail-Safe and/or Fail-Secure power outputs. b) Eight (8) form C 5 amp rated relay outputs c) Any combination of the above. Eight (8) auxiliary power outputs (unswitched) Output ratings:
PTCs are rated @ 2.5 amp. Filtered and electronically regulated outputs (built-in power supply).
Visual Indicators: Red LEDs indicate outputs are triggered (relays energized). Green LED indicates FACP disconnect is triggered. AC input and DC output LED indicators.
Battery Backup: Built-in charger for sealed lead acid or gel type batteries. AL600ULXB (Power Supply Board) maximum charge current 0.7 amp. Automatic switch over to stand-by battery when AC fails. Zero voltage drop when unit switches over to battery backup (AC failure condition). Battery fail and battery presence supervision (form C contact).
Electrical: Operating temperature: 0В° C to 49В°: C ambient. ACM8CB board main fuse is rated at 10 amp. BTU/Hr.: