Image for Altronix® 8 Fused Outputs Power Supply/Access Power Controller from HD Supply
+ / - Hover over image to Zoom

Altronix® 8 Fused Outputs Power Supply/Access Power Controller

$397.28
Part 185234
Brand Altronix
SHIPPING CHARGES
May apply
SHIPS WITHIN 2 DAYS
RESTOCKING FEES
May apply

About this item

  • Access Power Controller with PowerSupply
  • Converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 4 amp @ 12VDC or 3 amp @ 24VDC continuous supply current.
  • Input 115VAC 60Hz rated @ 1.9 amp. Power supply input options: a) One (1) common power input for ACM8/ACM8CB and lock power (factory installed). b) Two (2) isolated power inputs
  • One (1) to power the ACM8/ACM8CB and one (1) for lock accessory power, (external power supply is required). (Current is determined by the power supply connected, not to exceed a maximum of 10 amp total). Eight (8) Access Control System trigger inputs. Input options: a) Eight (8) normally open (NO) inputs. b) Eight (8) open collector inputs. c) Any combination of the above
  • Output: 12VDC or 24VDC outputs. 12VDC @ 4 amp supply current or 24VDC @ 3 amp supply current. Class 2 Rated power limited outputs. Eight (8) independently controlled outputs. Output options: a) Eight (8) Fail-Safe and/or Fail-Secure power outputs. b) Eight (8) form C 5 amp rated relay outputs c) Any combination of the above. Eight (8) auxiliary power outputs (unswitched) Output ratings:
  • Fuses are rated @ 3.5 amp. Filtered and electronically regulated outputs (built-in power supply).
  • Features: Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs. Fire Alarm disconnect input options: a) Normally open (NO) or normally closed (NC) dry contact input. b) Polarity reversal input from FACP signaling circuit. Alarm output relay indicates that FACP input is triggered (form C contact rated @ 1 amp 28VDC not evaluated by UL). Short circuit and thermal overload protection.
  • Visual Indicators: Red LEDs indicate outputs are triggered (relays energized). Green LED indicates FACP disconnect is triggered. AC input and DC output LED indicators.
  • Battery Backup: Built-in charger for seal

Related Searches