Studscan Mode Locates The Center, Edges, And Direction Of Wood Or Metal Studs Up To 3/4 In. (19 Mm) D
DeepScan mode doubles the scanning depth to 1-1/2 in. (38 mm)
WireWarning detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) D in stud and metal scanning modes
Metal scan mode locates non-ferrous metal, such as copper pipe, up to 1-1/2 in. (38 mm) D, and ferrous metal, such as steel pipe, up to 3 in. (76 mm) D
AC scan mode locates live, unshielded AC electrical wiring up to 2 in. (51 mm) D
ACT (Auto Correcting technology) automatically corrects common errors, such as when scanning begins over a stud
Backlit LCD display with target spotlight indicates the direction and edge of the stud and illuminates when the center of the stud is detected
SpotLite pointer shines an arrow-shaped light on the wall to clearly indicate the center of the stud
Zircon recommends the use of a brand new 9-Volt battery (sold separately), check the battery expiration date upon battery installation and replace battery periodically due to the LCD power requirements
Translucent base and illuminated V-marker groove for more accurate marking of target location
Signal strength indicator helps to distinguish between shallow and deep targets