Studscan Mode Locates The Center, Edges, And Direction Of Wood Or Metal Studs Up To 3/4 In. (19 Mm) Deep
DeepScan mode doubles the scanning depth to 1-1/2 in. (38 mm)
WireWarning detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (50 mm) Deep
ACT (Auto Correcting technology) automatically corrects common errors, such as when scanning begins over a stud
Backlit LCD display with Target Spotlight indicates the direction and edge of the stud and illuminates to indicate the stud center location
SpotLite pointer shines an arrow-shaped light on the wall to clearly indicate the stud center
Signal strength indicator helps to distinguish between shallow and deep targets
Translucent base and illuminated "V" marker groove allow for more accurate marking of stud locations
Zircon recommends the use of a brand new 9V battery (not included); check the battery expiration date upon installation and replace as needed to power the LCD display
