Studscan Mode Locates The Center, Edges, And Direction Of Wood Or Metal Studs Up To 3/4 In. (19 Mm) D
DeepScan mode doubles the scanning depth to 1-1/2 in. (38 mm)
WireWarning detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) D in stud and metal scanning modes
Metal scan mode locates non-ferrous metal, such as copper pipe, up to 1-1/2 in. (38 mm) D, and ferrous metal, such as steel pipe, up to 3 in. (76 mm) D
ACT (Auto Correcting technology) automatically corrects common errors, such as when scanning begins over a stud
Backlit LCD display with target spotlight indicates the direction and edge of the stud and illuminates when the center of the stud is detected
Low battery indicator for optimum performance
Signal strength indicator helps to distinguish between shallow and deep targets
SpotLite pointer shines an arrow-shaped light on the wall to clearly indicate the center of the stud