Gel stain is unlike regular oil based stains. It is ideal for vertical surfaces such as doors and window trim. The properties of gel stain will provide twice the coverage of oil based stains which does not drip or run and causes no lap marks or grain raise. It can also be used to create a natural wood look to fiberglass and composite doors. This product can be used for both interior and exterior applications. Use on furniture, doors, veneer or outdoor furniture. Allow stain to dry a minimum of 2 hours and then re-coat if desired. Then allow to dry 8 hours before applying an oil based protective finish or 24 hours dry time before applying water based protective finish. This product should not be used on floors, decks or siding. Covers approximately 200 to 250 Sq Ft per Quart Clean up with mineral spirits or paint thinner.