Multi-output access control power supply/charger is specifically designed for use with accesscontrol systems and accessories
Input 115VAC / 60Hz, 3.5 amp. Input fuse rated @ 3.5 amp/250V. Fire Alarm Panel or Access ControlSystem trigger inputs. N.O. or N.C.supervised trigger input and polarity reversal trigger input.
Output: 12VDC or 24VDC selectable outputs. 2.5 amp supply current. Five (5) PTC protected outputs, rated @ 2 amp. Output relay energizes when unit is triggered (form C contact rated 1 amp @ 28VDC). Filtered and electronically regulated output. Short circuit and thermal overload protection.
Battery Backup: Built-in charger for sealed lead acid or gel type batteries. Automatic switch over to stand-by battery when AC fails. Maximum charge current 0.7 amp.
Supervision: AC fail supervision (form C contacts). Low battery supervision (form C contacts). Battery presence supervision (form C contacts). Power fail supervision relay (form C contacts).
Visual Indicators: AC input and DC output LED indicators (power supply board). Red LEDs indicate condition of power outputs (multi-output board). Power & input trigger LEDs (multi-output board).
Electrical: Operating temperature: 0° C to 49° C ambient. 11-23BTU/Hr. System AC input VA requirement: 166.75VA.